W100 Series Water Treatment Controllers
The W100W series provide an economical and reliable way to keep your cooling tower, boiler, or condensate water treatment program under control.
Benefits:
- Large display with icon based programming makes setup easy
- Universal sensor input provides extraordinary flexibility; the same controller can be used with almost any type of sensor needed
- Multiple language support allows simple setup no matter where your business takes you
- The third control relay allows the controller to be used in more places than other entry level products
Complete flexibility in the function of each relay
- Bleed on conductivity
- Bleed time proportional to makeup water volume
- Boiler Blowdown on conductivity using intermittent sampling
- Feed in proportion to bleed time
- Feed time proportional to makeup water volume
- Feed as a percentage of elapsed time
- Biocide timer with pre-bleed and post-feed bleed lockout options
Optional analog (4-20 mA) output for recording, datalogging or connection to building energy management systems
Specifications:
Inputs
Power 100-240 VAC, 50 or 60 Hz, 7A max - Fuse: 6.3 Amp
Digital Input Signals (2) - State-Type Electrical: Optically-isolated input. Provides isolated 9V power. Current consumption when input is closed: 2.3 mA nominal. Typical response time: <2 seconds Devices supported: Any isolated dry contact (i.e. relay, reed switch) Types: Interlock
Low Speed Counter-Type Electrical: Optically-isolated input. Provides isolated 9V power. Current consumption when input is closed: 2.3 mA nominal. 0-10Hz, 50 msec minimum pulse width Devices supported: Any device with isolated open drain, open collector, transistor or reed switch Types: Contacting Flowmeter
High-Speed Counter-Type Electrical: Optically-isolated input. Provides isolated 9V power. Current consumption when input is closed: 2.3 mA nominal. 0-500Hz, 1.00 msec minimum pulse width Devices supported: Any device with isolated open drain, open collector, transistor or reed switch Types: Paddlewheel Flowmeter
Outputs
Powered Mechanical Relays (0 or 3 model code dependent) Pre-powered on circuit board switching line voltage. 6 A (resistive), 1/8 HP (93W) per relay All three relays are fused together as one group, total current for this group must not exceed 6A
Dry contact mechanical relays (0 or 3 model code dependent) 6 A (resistive), 1/8 HP (93W) per relay Dry contact relays are not fuse protected
4 - 20 mA (0 or 1 model code dependent) Internally powered Fully isolated 600 Ohm max resistive load Resolution .0015% of span Accuracy ± 0.5% of reading
Mechanical (Controller) Enclosure: Polycarbonate Enclosure Rating: NEMA 4X (IP65) Display: 128 x 64 graphic backlit display Ambient Temperature: -4 to 131°F (-20 to 55°C) Shipping Temperature: -4 to 176°F (-20 to 80°C) Shipping weight: 22 lbs (10 kg) (approximately) varies with model
Agency Certifications Safety: UL 61010-1:2012, 3rd Edition CSA C22.2 No.61010-1:2012, 3rd Edition IEC 61010-1:2010 3rd Edition EN 61010-1:2010 3rd Edition EMC: IEC 61326-1:2012 EN 61326-1:2013
Note: For EN61000-4-6, EN61000-4-3 the controller met performance criteria B. This equipment is suitable for use in establishments other than domestic and those directly connected to a low voltage (100-240 VAC) power supply network which supplies buildings used for domestic purposes.
| Key | A | B | C | D | E | F | G | H | I |
|---|---|---|---|---|---|---|---|---|---|
| WCTW | +/- 0.1", 2.5 mm | +/- 0.1", 2.5 mm | +/- 0.1", 2.5 mm | +/- 0.1", 2.5 mm | +/- 0.1", 2.5 mm | +/- 0.3", 8 mm | +/- 0.3", 8 mm | +/- 0.3", 8 mm | +/- 0.01", 0.25 mm |
| Sensor option H | 24" - 610 mm | 22.5" - 571 mm | 19" - 483 mm | 17.5" - 445 mm | 0.75" - 19 mm | 14" - 356 mm | 6" - 152 mm | 3" - 76 mm | 0.25" - 6.35 mm |
| Sensor options B, F | 13" - 330 mm | 12" - 305 mm | 11.75" - 298 mm | 10.75" - 273 mm | 0.5" - 12.7 mm | 7" - 178 mm | 2" - 51 mm | 1.5" - 38 mm | 0.25" - 6.35 mm |
| Sensor option D | 22.5" - 571 mm | 21.5" - 546 mm | 11.75" - 298 mm | 10.75" - 273 mm | 0.5" - 12.7 mm | 7" - 178 mm | 2" - 51 mm | 6" - 152 mm | 0.25" - 6.35 mm |
| SKU | Description | List price | - |
|---|---|---|---|
| WAL-WPHBW100HAN | WPHBW100H-A-N | W100 pH/ORP Controller w/ BNC - Non-Amplified - 3 Powered - HW - 1x 4-20mA Out - No sensor | $801.00 | |
| WAL-WPHBW100HNN | WPHBW100H-N-N | W100 pH/ORP Controller w/ BNC - Non-Amplified - 3 Powered - HW - No 4-20mA Out - No sensor | $649.00 | |
| WAL-WPHBW100PAN | WPHBW100P-A-N | W100 pH/ORP Controller w/ BNC - Non-Amplified - 3 Powered - USA - 1x 4-20mA Out - No sensor | $853.00 | |
| WAL-WPHBW100PNN | WPHBW100P-N-N | W100 pH/ORP Controller w/ BNC - Non-Amplified - 3 Powered - USA - No 4-20mA Out - No sensor | $700.00 | |
| WAL-WPHBW110HAN | WPHBW110H-A-N | W100 pH/ORP Controller w/ BNC - Non-Amplified - 3 Dry - HW - 1x 4-20mA Out - No sensor | $801.00 | |
| WAL-WPHBW110PAN | WPHBW110P-A-N | W100 pH/ORP Controller w/ BNC - Non-Amplified - 3 Dry - USA - 1x 4-20mA Out - No sensor | $815.00 | |
| WAL-WPHBW110PNN | WPHBW110P-N-N | W100 pH/ORP Controller w/ BNC - Non-Amplified - 3 Dry - USA - No 4-20mA Out - No sensor | $663.00 | |
| WAL-WPHBW120HAN | WPHBW120H-A-N | W100 pH/ORP Controller w/ BNC - Non-Amplified - 2 Pulse - 1 Dry - HW - 1x 4-20mA Out - No sensor | $801.00 | |
| WAL-WPHBW120HNN | WPHBW120H-N-N | W100 pH/ORP Controller w/ BNC - Non-Amplified - 2 Pulse - 1 Dry - HW - No 4-20mA Out - No sensor | $649.00 | |
| WAL-WPHBW120PAN | WPHBW120P-A-N | W100 pH/ORP Controller w/ BNC - Non-Amplified - 2 Pulse - 1 Dry - USA - 1x 4-20mA Out - No sensor | $815.00 | |
| WAL-WPHBW120PNN | WPHBW120P-N-N | W100 pH/ORP Controller w/ BNC - Non-Amplified - 2 Pulse - 1 Dry - USA - No 4-20mA Out - No sensor | $663.00 |
The Supplyline team is here to help!