
Pictures may not be actual SKU
Rated output
0.49 to 30 gpd
Pump max pressure
80 psi
Meter size
3/4 or 1 in
Pulse rate
1, 2, or 4 per gallon
Pump
Econ FP / Econ Integrator / Econ Stennicator
Stenner Econ Meter Systems pair an Econ peristaltic pump with a dry contact pulse water meter on a factory-assembled panel, so chemical feed follows water use. Choose the Econ FP, Econ Integrator, or Econ Stennicator system, then the pump output, cord, line, and the meter size and pulse rate.
24/7 Sales support
Free shipping over $500
Lifetime tech support
Starting at:
$1,524.36
Availability
Available to order
Questions? Urgent request?
Call or text 24/7: +1 (484) 544-0506
Contact us
Rated output
0.49 to 30 gpd
Pump max pressure
80 psi
Meter size
3/4 or 1 in
Pulse rate
1, 2, or 4 per gallon
Pump
Econ FP / Econ Integrator / Econ Stennicator
Product details
Headline
Econ Meter Systems – Ship pre-assembled for convenience and quick installation
Features & benefits
- Econ FP Meter System
- Includes a junction box for organized wires
- Flow Indicator included for verifying the solution is pumping
- Econ FP is self-priming with no loss of prime due to gaseous solutions.
- Econ Integrator™ Meter System
- Pump operating times are digitally adjusted from 0.1 to 60 seconds in 1% increments.
- The solutions are contained in the tube and in suction/discharge lines so they do not touch the moving parts in the pump.
- Equipped with a safety lockout feature and a standby mode.
- Standby mode allows tube replacement in the pump head without disconnecting the power and/or the lead wires
- Econ Integrator™ is self-priming and doesn't lose prime due to off-gassing solutions.
- Econ Stennicator Meter System
- Pump injects at the 1:128 ratio straight into the water line
- The solutions injected are contained in the tube and suction/discharge lines and do not touch the moving parts in the pump.
- Stennicator is self-priming with no loss of prime due to gaseous solutions.
Additional notes
Applications and availability
- Treating water proportionally to the system flow rate is often a preferred method for disinfection, pH control, oxidation and more. (Econ FP Meter System)
- Quality water is proven to improve livestock and poultry production and health and it is vital for the maintenance of the water supply equipment. (Econ Integrator™ Meter System)
- The single system is best for water flow rates up to 2.7 gallons per minute (162 gallons per hour). The dual system includes two pumps to keep up with water flow rates up to 5.4 gallons per minute (325 gallons per hour). (Econ Stennicator Meter System)
Agency Listings
- Econ Integrator™ Meter System: Listings vary by model. 24VDC pumps do not carry any agency listings.
- Econ Stennicator Meter System: Listings vary by model. 24VDC pumps do not carry any agency listings.
Notes
- Notice: The information within the charts above is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs.
*Continuous Flow: The meter size should be selected based on continuous flow GPM and not pipe size.**1 1/2″ meter may include plastic or lead free brass couplings. (Econ FP Meter System)**1 1/2″ meter may include plastic or lead stainless steel couplings. (Econ Integrator™ Meter System)**1 1/2″ meter may include plastic or lead free stainless steel couplings. (Econ Stennicator Meter System)
Footnotes
*Santoprene® is a registered trademark of Celanese International Corporation.
Stenner literature
- Econ FP Meter System: Econ Meter System Instructions, Econ FP Pump Manual, and Flow Indicator Installation
- Econ Integrator™ Meter System: Econ Meter System Instructions, Econ Integrator™ Pump Manual, Flow Indicator Instructions, and Animal Health Brochure