Pictures may not be actual SKU
Manual
Rated output
3 to 170 gpd (0.13 to 7.1 gph)
Max pressure
25 or 100 psi
Tube material
Santoprene or Versilon
Control
Adjustable or fixed
Voltage
120 V or 220 V, 60 Hz

Stenner Classic Series electromechanical peristaltic metering pumps, single or double head, with adjustable or fixed output and 25 or 100 psi ratings. Choose the model, pump tube, voltage, line, and tube material to match your feed rate and injection pressure.

24/7 Sales support
Free shipping over $500
Lifetime tech support
Starting at:

$581.60

Select options
Availability
Available to order
Questions? Urgent request?
Call or text 24/7: +1 (484) 544-0506
Contact us

Rated output
3 to 170 gpd (0.13 to 7.1 gph)
Max pressure
25 or 100 psi
Tube material
Santoprene or Versilon
Control
Adjustable or fixed
Voltage
120 V or 220 V, 60 Hz
All possible part numbers

Product details

Headline

Classic Series – Electromechanical peristaltic metering pumps

Features & benefits

  • Simple tube replacement with QuickPro® pump head
  • Self-priming with output reproducibility
  • Can inject off gassing solutions without loss of prime
  • Can run dry without damage
  • 3-point roller assembly prevents backflow

Additional notes

Applications and availability

  • Injection can be directly into the water line and can also be activated by a pressure switch or controller.
  • The pump is also a component of Stenner's pre-assembled panel system the Proportional Injection System. (Single Head Fixed)

Agency Listings

  • Single Head Adjustable: IAPMO listed, conforms to standard NSF/ANSI 61 & 372 (excludes models with Versilon® tube).
  • Single Head Adjustable: INTERTEK/ETL Sanitation listed, adjustable models conform to standard NSF/ANSI 50 (excludes models with Versilon® tube).
  • Single Head Adjustable: Listings vary by model.
  • Single Head Fixed: IAPMO listed, conforms to standard NSF/ANSI 61 & 372 (excludes models with a Versilon® tube.)
  • Single Head Fixed: INTERTEK/ETL Sanitation listed, fixed models conform to standard NSF/ANSI 50 only when used with standard NSF/ANSI 50 listed controllers.
  • Double Head Adjustable: IAPMO listed, conforms to standard NSF/ANSI 61 & 372 (excludes models with a Versilon® tube).
  • Double Head Adjustable: INTERTEK/ETL Sanitation listed, adjustable models conform to standard NSF/ANSI 50 (excludes models with a Versilon® tube).
  • Double Head Adjustable: Listings vary by model.
  • Double Head Fixed: IAPMO listed, conforms to standard NSF/ANSI 61 & 372 (excludes models with a Versilon® tube).
  • Double Head Fixed: INTERTEK/ETL Sanitation listed, fixed models conform to standard NSF/ANSI 50 only when used with standard NSF/ANSI 50 controllers.

Notes

  • Refer to the chemical resistance guide to determine the compatibility of the wetted components with the solution you want to pump.
  • Notice: The information within the charts above is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs.

Footnotes

  • * Santoprene® is a registered trademark of Celanese International Corporation.
  • ** Versilon® is a registered trademark of Saint-Gobain Performance Plastics.
  • † Pellethane® is a registered trademark of Lubrizol Advanced Materials, Inc.

Stenner literature

  • Installation Manual
  • Basic Service Manual
  • QP Tube & Pump Head Replacement, and Service Kit Instructions
  • Innermost QP Tube & Pump Head Replacement (100 & 170 Models)
  • Duckbill Check Valve Replacement
  • Troubleshooting Guide
  • 45MJ & 85MJ Models Classic Series Single Head Adjustable Spec Sheet
  • 45MF & 85MF Models Classic Series Single Head Fixed Spec Sheet
  • 100J & 170J Models Classic Series Double Head Adjustable Spec Sheet
  • 100F & 170F Models Classic Series Double Head Fixed Spec Sheet
  • Chemical Resistance Guide
  • Catalog