Product details
Spot an error? Let us know!
Headline
EX100/200
Adjustable Depth Insertion Magmeter
EX150/250
Hot-Tap Adjustable Depth Insertion Magmeter
Features & Benefits
EX100/200 Features:
- Depth adjustable sensors
- EX110 fits any 1-1/2″ pipe fitting (standard saddle, for instance) and adjusts to pipe sizes 3-10″
- EX210 adjusts to pipe sizes 10-48″
- Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
- Accept Seametrics modules for rate and total indication, 4-20 mA conversion, data logging, and flow switching
- Alternatively, signal can be sent directly to a PLC or other control
- Available in brass or 316 stainless steel
- Immersibility and reverse flow output available
- Certified to NSF/ANSI 61 Standard (stainless version)
EX150/250 Features:
- Isolation valve allows installation and removal under pressure
- Useful in large water utility pipe and other applications where shutdown is not an option
- EX150 fits pipe from 3″ to 10″
- EX250 fits pipe from 10″ to 48″
- Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
- In most applications, installation tool not necessary due to small tube diameter
- Available in brass or 316 stainless steel
- Standard valve material is brass, with stainless optional
- Certified to NSF/ANSI 61 Standard (stainless version)
Additional Notes
| Specs | Value |
|---|---|
| Pipe Size | 3” to 48” (up to 72” optional) |
| Power | Full Power: 12 - 24 Vdc, 250mA Low Power: 12 - 24 Vdc, 40mA average with 250mA peaks |
| Housing Materials | Powder-coated cast aluminum |
| Tubing/Fitting/Sensor Housing Materials | Brass or 316 Stainless Steel |
| Electrodes Materials | Hastelloy |
| Electrode Cap Materials | PVDF |
| O-Ring Materials (15x/25x only) | EPDM |
| Valve Assembly Materials (15x/25x only) | Bronze (stainless optional) with bronze ball valve |
| Fitting Size Required | 11x/21x: 1.5” FNPT 15x/25x: 2” FNPT |
| Maximum Pressure | 200 psi (14 bar) |
| Ambient Temperature | 0˚ to 160˚ F (-17˚ to 72˚ C) |
| Fluid Temperature | 32˚ to 200˚ F (0˚ to 93˚ C) |
| Minimum Conductivity | 20 microSiemens/cm |
| Flow Velocity | 0.28 - 20 ft/sec (0.08 - 6.09 m/sec) |
| Accuracy | ± 1% of full scale |
| Output | Square wave pulse, opto-isolated, 500 Hz @ 20 ft/sec 6 mA max, 30Vdc forward flow standard; reverse flow optional |
| Empty Pipe Detection | Software, defaults to zero flow |
| Cable | Standard 18’ (6m), #22 shielded twisted pair, 4-conn. Max. cable run at 24 Vdc = 1000’ (300m); at 12 Vdc = 500’ (150m). For other circumstances, contact the factory. |
| Environmental | See meter mounted electronic specification for rating. |
| Regulatory | Mark (applies to full power sensor only configuration and full power FT 430/440 mounted configurations). Certified to NSF/ANSI standard 61 and NSF 372 (Stainless only) |
Call or text: +1 (484) 544-0506
The Supplyline team is here to help!